Dialing Plan configuration Page 215 of 258
Configuration
To configure the main office:
•Configure the ESN Control Block for CDP in LD 86.
>LD 86 REQ NEW CUST 0 FEAT ESN CDP YES MXSC 50 NCDP 4 DLTN YES
•Configure the CDP Distant Steering Code (DSC) in LD 87.
>LD 87
REQ NEW
CUST 0
FEAT CDP
TYPE DSC
DSC 4
FLEN 4
RLI 12
To configure the NRS (H.323 Gatekeeper):
•Create CDP Domain: “MO_BO_CDP”.
•Create H.323 endpoints: “MO”, “BO”.
•Create Numbering Plan entries in CDP Domain:
—Add “4” for endpoint “BO”.
—Add “30” for endpoint “MO”.
To configure the SRG:
•Set the BUID to the same number that was assigned for the TN by the main office.
•Set the main office VoIP Trunk Access code to 0.
•Do not assign a value to the main office trunk access code field.
Main Office Configuration for Survivable Remote Gateway 50 Configuration Guide
