Bandwidth Management Page 59 of 258
Figure 5
Configuring a codec
Configuring Bandwidth Management
The steps to configure Bandwidth Management on the Call Server are as follows:
1Define a VPNI number in LD 15.
2Configure the Bandwidth Management parameters for each zone on the Call Server using either Element Manager (see “Configuration using CS 1000 Element Manager” on page 60) or LD 117 (see “Configuration using LD 117” on page 61):
•Call Server zones that will be used for endpoints (telephones and gateways) with the following properties:
—Intrazone Preferred Strategy = Best Quality (BQ)
—Intrazone Bandwidth = default (1000000)
—Interzone Preferred Strategy = Best Bandwidth (BB)
Main Office Configuration for Survivable Remote Gateway 50 Configuration Guide
