Page 162 of 258 Alternative Call Routing for Network Bandwidth Management
Maintenance
Command Line Interface maintenance
LD 117 - Enable and disable Alternative Call Routing for NBWM for a zone.
Command | Description |
|
|
ENL ZALT <zone> | Enable Alternative Call Routing for Bandwidth Management for |
| zone specified. |
|
|
DIS ZALT <zone> | Disable Alternative Call Routing for Bandwidth Management for |
| zone specified. |
|
|
ENL ZBR <zone> [ALL] [LOC][ESA][TIM][ALT] Enable features for the branch office zone. If you do not input features, then all are enabled.
DIS ZBR [ALL] [LOC][ESA][TIM][ALT] Disable features for the branch office zone. If you do not input features, then all are disabled.
Note: The system responds with ok, if operation is successful.
LD 117 - Change and Print Zone Alarm Suppression Time Interval.
Command
Description
CHG ZAST <zone> <Alarm Suppression Interval>
| Change Suppression Time Interval for QoS alarms related to |
| Alternative Call Routing for NBWM feature for zone specified. |
| Time Interval is measured in seconds from the time the last alarm |
| was printed. |
| Default is 0. Range is 0 - 3600 seconds. |
|
|
PRT ZAST <zone> | Print Suppression Time Interval for QoS alarms related to |
| Alternative Call Routing for NBWM feature for zone specified. |
| No entry for zone number results in printout for all zones. |
|
|
