Page 190 of 258 Dialing Plan configuration
INST
CTYP LOC Set according to associated SPN pattern
REQ NEW CUST 0 FEAT RLB RLI 18 ENTR 0 LTER NO ROUT 18
...
DMI 18
...
2Configure ESN Special Number and Digit Manipulation.
LD 90 – Configure ESN Special Number and Digit Manipulation. (Part 1 of 2)
Prompt | Response | Description |
|
|
|
REQ | NEW | Add new data. |
CUST | xx | Customer number as defined in LD 15 |
FEAT | NET | Network translation tables |
TRAN | AC1 | Translator – Access Code 1 (NARS/BARS) |
|
| Because the call is incoming to the branch office, AC1 is |
|
| triggered if INAC = YES in the Route Data Block for the |
|
| Virtual Trunk in LD 16 and the INTL call type is associated |
|
| with AC1 in NET_DATA of the Customer Data Block in |
|
| LD 15. |
TYPE | SPN | Special code translation data block |
SPN | x...x | Special Number translation |
|
| Enter the SPN digits in groups of 3 or 4 digits, separated by |
|
| a space (for example, xxxx xxx xxxx). The SPN can be up to |
|
| 19 digits long. |
|
| The maximum number of groups allowed is 5. |
|
|
|
