Page 184 of 258 Dialing Plan configuration
CLTP NATL
...
SPN 1015
FLEN 10 7 digits for
...
RLI 30
CLTP LOCL
...
SPN 1016
FLEN 10 7 digits for
...
RLI 30 CLTP LOCL
...
Procedure 12
Configuring the NRS database
After configuring main office routing to the NRS, the NRS database must be provisioned to identify the desired endpoint for the calls. This procedure configures the NRS database with the inserted digits specified by the zone- based digit manipulation configuration.
Note: Instead of configuring the NRS database, you can configure a route in the main office to directly route the call (see step 4 on page 181).
This procedure provides information specific to the configuration of the NRS database for this application. Refer to IP Peer Networking: Installation and Configuration
1Click the Configuration tab in NRS.
2Click set Standby DB view to work in the standby (inactive) database.
3Select Routing entries from the navigation menu on the
The Routing Entries window opens, as shown in Figure 57 on page 185.
