Nortel Networks Remote Gateway 50 manual Configuration using Element Manager

Bandwidth Management Page 77 of 258

Refer to Converging the Data Network with VoIP (553-3001-160) for information on notification levels for alarms.

Configuration using Element Manager

Element Manager can be used to enable and configure the feature.

The zone must exist before it can be configured for Adaptive Network Bandwidth Management. Refer to IP Peer Networking: Installation and Configuration (553-3001-213) for instruction on how to create and configure basic properties of the zone.

To configure the Adaptive Network Bandwidth Management feature, select a zone on the Zones web page (see Figure 6 on page 61) and click Adaptive Network Bandwidth Management and CAC. The Adaptive Network Bandwidth Management and CAC web page opens, as shown in Figure 14 on page 78.

Note: Do not configure Adaptive Networks Bandwidth Management for Zone 0 or Virtual Trunk zones.

Main Office Configuration for Survivable Remote Gateway 50 Configuration Guide