Page 42 of 258 Setting up the main office
Note: The branch office zone number and zone bandwidth management parameters at the main office must match the corresponding branch office zone number and zone bandwidth management parameters at the branch office.
IMPORTANT!
Zone 0, the default zone, must not be configured as a branch office zone. Network Bandwidth Management does not support zone 0. If zone 0 is configured as an branch office zone, the Bandwidth Management feature is not activated.
3Define the zone parameters for the branch office. Use LD 117 or Element Manager. Refer to IP Peer Networking: Installation and Configuration
LD 117 – Define zone parameters for the branch office.
Command
Description
CHG ZBRN <Zone> <yesno>
Define a zone as a branch office zone.
CHG ZDST <Zone> <yesno> <StartMonth> <StartWeek> <StartDay> <StartHour> <EndMonth> <EndWeek> <EndDay> <EndHour>
If the branch office observes Daylight Savings Time (DST), these parameters specify the start and end of DST. During DST, the clock automatically advances one hour forward.
CHG ZTDF <Zone> <TimeDifferencefromMainOffice>
Specified in minutes, the time difference between main office and branch office when both are not in DST.
CHG ZDES <Zone> <ZoneDescription
A name to render data display more meaningful.
