| Bandwidth Management | Page 79 of 258 | |
|
|
|
|
Table 5 |
|
|
|
Adaptive Network Bandwidth Management and CAC fields |
|
| |
|
|
| |
|
| LD 117 | |
Field Title | Field Definition | equivalents | |
|
|
| |
Enable Call Admission | Control the CAC feature for the zone | ENL ZCAC | |
Control Feature (CAC) | • Enable (check box selected) | DIS ZCAC | |
| |||
| • disable (clear the check box) |
|
|
|
|
| |
QoS Response Time | Bandwidth limit increment, as a percentage | CHG ZQRT | |
Increase (ZQRT) | of the QoS factor for the zone |
|
|
|
|
| |
QoS Response Time Interval | Time (in minutes) between bandwidth limit | CHG ZQRTI | |
(ZQRTI) | increments |
|
|
|
|
| |
Warning Alarm Threshold | A QoS value, which is lower than this value, | CHG ZQWAT | |
(ZQWAT) | but higher than the Critical (Unacceptable) |
|
|
| Alarm Threshold, triggers a Major Alarm. |
|
|
|
|
| |
Critical Alarm Threshold | A QoS value, which is lower than this value, | CHG ZQUAT | |
(ZQUAT) | triggers an Unacceptable (Critical) Alarm. |
|
|
|
|
| |
R Alarm Coefficient (CR) | The R (Cr) coefficient is used to calculate | CHG CR | |
| the QoS value for the zone. |
|
|
|
|
| |
Packet Loss Alarm | The Packet Loss (Cpl) coefficient is used to | CHG CPL | |
Coefficient (CPL) | calculate the QoS value for the zone. |
|
|
|
|
| |
Delay Alarm Coefficient (CD) | The Delay (Cd) coefficient is used to | CHG CD | |
| calculate the QoS value for the zone. |
|
|
|
|
| |
Jitter Alarm Coefficient (CJ) | The Jitter (Cj) coefficient is used to calculate | CHG CJ | |
| the QoS value for the zone. |
|
|
|
|
| |
Coefficient of QoS (CQoS) | The Coefficient of QoS (CQoS) is used to | CHG CQOS | |
| calculate the overall QoS value for the zone. |
|
|
|
|
| |
Recent Validity Time Interval | Amount of time (in hours) for | CHG CACVT | |
(CACVT) | record validity. Once this interval expires, |
|
|
| records for unused zones are purged from |
|
|
| the tables. |
|
|
|
|
|
|
Main Office Configuration for Survivable Remote Gateway 50 Configuration Guide
