Nortel Networks Remote Gateway 50 manual Universal Dialing Plan, Overview

Page 216 of 258 Dialing Plan configuration

For more information on configuring the main office and NRS, refer to Branch Office: Installation and Configuration (553-3001-214) and IP Peer Networking: Installation and Configuration (553-3001-213). For more information on configuring the SRG, refer to SRG50 Configuration Guide.

Universal Dialing Plan

Overview

Figure 74 on page 217 shows an example of a Uniform Dialing Plan (UDP) using location codes (Access Code + LOC + DN) configuration.

In this type of dialing plan, the DNs on the SRG do not need to be different from the BUID, since the location code (LOC) defines the unique node characteristic. Therefore, in this example:

•The SRG IP Phone has DN 3002 and BUID 3002. (The system adds the routing code and LOC code to the BUID).

•The local telephone has a DN of 3101.

•The main office has a telephone configured as TN 3001.

•On the main office, the AC1 steering code for the SRG is 6 and the LOC is 504.

•On the SRG, the destination code for the main is 6 and the LOC is 501.

553-3001-207 Standard 2.00 January 2006