|
| Dialing Plan configuration Page 191 of 258 |
|
|
|
LD 90 – Configure ESN Special Number and Digit Manipulation. (Part 2 of 2) | ||
|
|
|
Prompt | Response | Description |
|
|
|
- FLEN | Flexible Length | |
|
| The number of digits the system expects to receive before |
|
| accessing a trunk and outpulsing these digits. |
... |
|
|
- RLI | Route List Index configured in LD 86 (see step 1 on | |
|
| page 187) |
|
|
|
| After configuring the specialized route for calls that have been routed | |
| to the branch office by the NRS, the route must be associated with | |
| the ESN Special Number. | |
| The branch office receives the manipulated number as an incoming | |
| call, indicating that the ZDP value added at the main office is at the | |
| beginning of the number. The branch office ESN configuration must | |
| ensure that the extra digits (the ZDP value) are deleted by using a | |
| proper DMI. The call then terminates at the PSTN connection. | |
| Note: The DMI configured in LD 86 in step 1 on page 187 is used to | |
| remove the digits that were inserted in the dialed number at the main | |
| office. |
|
| For example, assume ZDP at the main office = 101, Customer | |
| number = 0, and the RLI for the PSTN trunk = 18. | |
| c. >LD | 90 |
| REQ | NEW |
| CUST 0 | |
| FEAT NET | |
| TRAN AC1 | |
| TYPE SPN | |
| SPN | 1011 |
| FLEN 0 | |
| ... |
|
| RLI | 18 |
Main Office Configuration for Survivable Remote Gateway 50 Configuration Guide
