Page 112 of 258 Bandwidth Management
5Provision the main office with the DGT table DMIs to insert the prefixes and set the Type of Number correctly. Create RLB RLI entries to use these DMIs for the VTRK route(s). One RLI per branch office will be the minimum requirement. Note that calls from remote systems will typically have the HLOC prefix, so this is defined here
Table 8 lists main office B DMI and RLI provisioning.
Table 8
Main office B DMI and RLI provisioning (for calls in branch office B)
Create a DMI | Create an RLI |
|
|
LD 86 | LD 86 |
|
|
REQ new | REQ new |
|
|
CUST 0 | CUST 0 |
|
|
FEAT dgt | FEAT rlb |
|
|
DMI 50 | RLI 50 |
|
|
DEL 0 | ENTR 0 |
|
|
ISPN no | LTER no |
|
|
INST 741841 | ROUT 71 |
|
|
CTYP loc | DMI 50 |
|
|
6Provision the main office with CDP DSCs (mapped by the RLI into Location Codes) sufficient to uniquely identify all of its branch offices (using extended location codes, if required); use the RLI index defined for each branch office as the RLI value of the LOC definition. This is the route to the branch office.
