Bandwidth Management Page 63 of 258
Maintenance commands
Maintenance commands can be run from Element Manager or LD 117.
Maintenance using Element Manager
The PRT INTRAZONE and PRT INTERZONE commands are available in Element Manager from the Zones web page, shown in Figure 6 on page 61. To access these commands, follow the steps in Procedure 3 on page 63.
Procedure 3
Printing intrazone and interzone statistics for a zone
1Select IP Telephony > Zones from the navigator.
The Zones web page opens, as shown in Figure 6 on page 61.
2Click Maintenance Commands for Zones (LD 117).
The Maintenance Commands for Zones web page opens, as shown in Figure 7 on page 64. This page lists all the configured zones.
Main Office Configuration for Survivable Remote Gateway 50 Configuration Guide
