Nortel Networks Remote Gateway 50 manual LD 86 Configure Route List Index. Part 1

Dialing Plan configuration Page 179 of 258

LD 86 – Configure the Digit Manipulation Index at the main office. (Part 2 of 2)

Prompt	Response		Description
INST	x...x		Insert. Up to 31 leading digits can be inserted, usually none
			at the main office. Default is none.
ISPN			IP Special Number
	(YES)		For off-net calls
	NO		For on-net calls
CTYP			Call type to be used by the call. This call type must be
			recognized by the NRS and far-end switch. This is critical
			for correct CLID behavior.
			If ISPN=NO, the CLID is based on this field. If ISPN=YES,
			the CLID is based on the call type before digit manipulation.
	SPN		For off-net calls (ISPN=YES)
	LOC		For on-net calls (ISPN=NO)
	b.	Configure the RLI in LD 86 with the RLB feature.

LD 86 – Configure Route List Index. (Part 1 of 2)

Prompt	Response	Description
REQ	NEW	Add new data.
CUST	xx	Customer number as defined in LD 15
FEAT	RLB	Route List data block
RLI		Route List Index to be accessed
	0-127	CDP and BARS
	0-255	NARS
	0-999	FNP
ENTR	0-63	Entry number for NARS/BARS Route List
	X	Precede with x to remove
LTER	NO	Local Termination entry

Main Office Configuration for Survivable Remote Gateway 50 Configuration Guide