Page 62 of 258 Bandwidth Management
LD 117 Configure a new or existing Bandwidth Management zone.
Command
Description
NEW CHG ZONE <zoneNumber> [<intraZoneBandwidth> <intraZoneStrategy> <interZoneBandwidth> <interZoneStrategy> <zoneIntent> <zoneResourceType>]
Configure a new zone (NEW) or change (CHG) an existing zone, where:
•zoneNumber =
•intraZoneBandwidth = Available intrazone bandwidth (Kbit/s); Nortel recommends this value be set to the maximum value.
•intraZoneStrategy = BB (Best Bandwidth) or BQ (Best Quality); Nortel recommends this value be set to BQ.
•interZoneBandwidth =
—For Call Server zone = Maximum bandwidth usage (in Kbit/s) allowed between peer Call Servers
—For Virtual Trunk zones = 1000000 (Kbit/s)
•interZoneStrategy = BB (Best Bandwidth) or BQ (Best Quality); Nortel recommends this value be set to BB to conserve interzone bandwidth.
•zoneIntent = type of zone, where:
—MO = Main Office (Call Server) zone
—BMG = Branch Media Gateway (for branch office zones)
—VTRK = Virtual Trunk zone
•zoneResourceType = resource intrazone preferred strategy, where:
—shared = shared DSP channels (default)
—private = private DSP channels
Note: In CS 1000 Release 4.5, the zones that were described with BMG designator stay with BMG one, all the other zones are provided with MO designator. It is possible to update ZoneIntent using CHG ZONE command.
