
Setting up the main office Page 37 of 258
Table 2:
SRG information required for the main office configuration (Part 2 of 2)
SRG parameters
Destination codes (steering codes) to route the main office calls to the SRG and out through the SRG PSTN lines
IP Ports that affect SRG traffic with the main office and have been assigned firewall filters
For further information on port configuration, refer to
Converging the Data Network with VoIP
160)or SRG50 Configuration Guide.
Main office information required by the SRG
The main office administrator must supply numerous main office settings to the SRG installer so that the SRG can be efficiently configured. In addition, the main office administrator needs to supply the following information:
•a list of the terminal record numbers (TNs)
•a list of BUIDs (Prime DNs)
•if using advanced routing, such as tandem dialing between systems, main office routing (steering) codes, are required
Use Table 3 to record main office information required by the SRG.
Table 3
Main office interoperation information (Part 1 of 3)
Main office components | Information about this system |
|
|
Main office IP network information: |
|
|
|
Main office call server type | S1000 (default) |
|
|
Primary network connect server address |
|
|
|
Alternate network connect server |
|
|
|
Network Connect server port |
|
|
|
Main Office Configuration for Survivable Remote Gateway 50 Configuration Guide