Nortel Networks Remote Gateway 50 manual Call between two local branch offices

Models: Remote Gateway 50

1 260
Download 260 pages 49.99 Kb
Page 123
Image 123

Bandwidth Management Page 123 of 258

Table 15

Provisioning details for this case (Part 2 of 2)

Region

Provisioning detail

 

 

1, 2, 3

All CDP numbers must be sufficiently long to allow unique

 

termination of the calls. That is, every main office/branch

 

office region requires its own LSC to ensure that all numbers

 

are unique.

 

 

1, 2, 3

Prefixes for branch offices for regular calls are required. May

 

have additional prefixes for E-911 calls, if required, or may

 

share prefixes.

 

 

1

All branch offices are provisioned at the NRS to route all calls

 

through the main office.

 

 

1

Main office sends all CDP calls to destinations that are not its

 

own branch office to the NRS with unchanged dialled digits.

 

 

1

Main office sends all CDP calls to destinations that are its own

 

branch office to the NRS with a specific gateway prefix in front

 

of the dialled digits.

 

 

1

All branch offices delete the prefix and terminate the calls.

 

May be to a local set or to a trunk.

 

 

2,3

Similar configuration, as above, applies to regions 2 and 3.

 

 

Call between two local branch offices

Figure 38 on page 124 shows the call flow of a call between two local branch offices.

Main Office Configuration for Survivable Remote Gateway 50 Configuration Guide

Page 123
Image 123
Nortel Networks Remote Gateway 50 Call between two local branch offices, Provisioning details for this case Part 2 Region