Wayne-Dalton 8850 Exhaust Port Installation, Or a double wide bottom rail

�Exhaust Port Installation

Tools Needed:	Exhaust port is installed on the back side of
	the bottom section into the aluminum panel
	or a double wide bottom rail.
	NOTE: Gaskets need to be installed against
	both sides of the door section.
	Install the exhaust port using (3) #10 x 1-1/2”
	counter sunk bolts and nuts, as shown.
	NOTE: After completing this step, continue
	with step 9 on page 13.

aluminum panel

Exhaust Port

Gasket

(3)#10 x 1-1/2” Counter Sunk Bolt

double wide bottom rail

Outside Trim Ring

(3) #10 Hex

Nuts

Gasket

24

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com