Wayne-Dalton 8850 installation instructions Package Contents

Package Contents					NOTE: Depending on the door model, some parts
					listed will not be supplied if not necessary. rear
					supports may or may not be included with your door.
	(2) Horizontal Track with attached horizontal angle RH/LH
			(1) Torsion TUBE
		door sections (as required)
								continuous
								wall angle
								assembly’s
								RH/LH Track
								(as required)
								Vertical track
								assembly’s
								(bracket
								mount track)
Rollers	right and left hand		right and left hand		TOP BRACKET		TOP BRACKET	RH/LH Track
					SLIDE		BASE	(as required)
(as required)	stanard bottom		2”/3” bottom brackets
					(as required)		(as required)
		brackets	w/roller carriers
		(As required)		(as Required)
Right & left hand		#1, #2, #3, & #4		STEP PLATE	L-reinforcing		(2) LIFT HANDLEs	weather seal &
End bearing Brackets		hinges (as required)			angle bracket			nails (if included)
					(as required)
Right & left hand Drums		(1) Center Bracket		#6 screw eye and pull		counterbalance cables		RH/LH Torsion
				rope (if included)				springs (as required)
								3

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com