Wayne-Dalton 8850 installation instructions Tools Required, P1 Removing An Old Door

	Tools Required
power drill	pencil	ratchet Wrench		vice grips		3/8”, 7/16” socket	gloves
						driver
Phillips Head	7/16”, 1/2” &	9/32”, 1/2”, 3/16” & 1/8”		Safety Glasses		1/4”, 3/8”, 7/16”, 1/2” &	hammer
Screwdriver	9/16” Socket	drill bits				9/16” Wrenches
		level		Tape Measure		vice clamps
sawhorse	Flat Tip Screwdriver		1/4” torx bit		Approved Winding Bars
							Step Ladder

P1 Removing An Old Door

Counterbalance spring tension must always be released before any attempt is made to start removing an existing door.

WARNING

a powerful spring releasing its energy suddenly can cause severe or fatal injury. to avoid injury have a trained door systems technician, using proper tools and instructions, release the spring tension.

For detailed information see supplemental instructions “removing an existing door/preparing the opening”. These instructions are available at no charge from Wayne-Dalton Corp., P.O. Box 67, Mt Hope, OH 44660, or at www.wayne-dalton.com.

PRE-INSTALLATION

5

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com