Vizio VS42LF Chapt er 3 Chapt er 3Chapte r 3, Setting Up to Watch Televis ion ,

VIZIO VS42L FHDTV10A User Manual
Version 2/11/2008 28
www.VIZIO.com
Chapt er 3
Chapt er 3Chapte r 3
Chapt er 3 Setting Up to Watc h Televi sion
Setting Up to Watch Televis ionSetting U p to Wa tch Tele vision
Setting Up to Watch Televis ion
For ‘Preparing Your LCD HDTV for Wall Mounting’, see page 6.
3.1
3.13.1
3.1 Ba sic
Basic Bas ic
Basic LCD
LCDLCD
LCD HD
HDHD
HDTV St
TV StTV St
TV St art Up
art Upart Up
art Up
1. Connecting the Power Cable
Connect the power cord to the power cord connector on the back of the HDT V, and then plug the
power cord into an AC wall socket.
2. Connect Audio and Video Cables to the HDTV
(see pages 14 ~ 26 for detailed steps)
3. Turning Power On
Once all the components are connected, press the Power ON button on the s ide of the HDTV, or
press the Power ON (Red) button on the remote control.
4. Select Input Source
Select the Input Source for the HDTV by pressing the INPUT
button on the side of the TV or using the Input button on the
remote control. Pressing this button will cycle you through the
following options: TV, AV1, AV2, Component1, Component2,
RGB, HDMI1 and HDMI2.
5. Using DTV and TV with an Antenna or Cable
At first power on, the HDTV will have the DTV/TV input selected
and will guide through some setup screens. If it is not the first
time the HDTV has been powered on, you will need to select TV
using the INPUT button on the remote control or the side of the
HDTV, or directly by pressing the TV button on the remote
control, and Auto Scan for the available TV channels.
a. The screen will show ‘snow’ and
the first Initial Setup OSD panel.
Press the OK button on the
remote control.
Note: If you do not see this option within the OSD , you might
have selected t he wrong input in the previous steps and you will
need to repeat step 4 (above) to select the correct input source.