VocoPro CD-6000RV owner manual Rear Panel Descriptions and Functions

Rear Panel

Descriptions and Functions

� � � � � �

��

� � � �� �� �� ��

1.HEADPHONE OUTPUT - Connect headphones to this ¼” input.

2.XLR MICROPHONE INPUTS - Connect three XLR microphone connections here. Each input corresponds with controls on the front panel of the CDG-6000RV.

3.XLR STEREO OUTPUT - Output the CDG-6000RV via left and right XLR cables.

4.NTSC/PAL SELECTOR SWITCH - This switch is used to select the NTSC/PAL setting according to country. For U.S. televisions systems it should be set to NTSC and for European television systems the selector should be set to PAL.

5.VOLTAGE SELECTOR SWITCH - This switch is used to select the voltage setting according to country. For use in the U.S. the voltage selector should be set to 115V and 230V in Europe.

6.115V/230V AC OUTLET - This outlet can be used to connect another component providing it does not exceed 250 watts maximum power consumption.

7.SPEAKER JACKS - Use these speaker jacks to connect speakers.

8.AUX AUDIO INPUT - Connect RCA stereo cables from your audio output device.

9.DVD INPUT - Connect RCA stereo and video cables from your DVD player output.

10.MEDIA INPUT - Connect any additional media player or audio output device to this audio/video RCA connection.

11.AUDIO PRE-AMP OUTPUT - Output the audio from your CDG-6000RV via RCA audio cables.

12.VIDEO OUTPUT - Output the video from your CDG-6000RV via RCA video cables.

13.EFFECT LOOP INPUT/OUTPUT - These jacks allow an External Effect or EQ Device to be connected to the CDG- 6000RV and applied to the source music (see page 10 for more details)

NOTE: When an External Effect or EQ Device is not connected, the EFFECT LOOP BARS must be inserted for speaker output.

14.POWER INPUT - Connect the power cord (included) here.

17