Scart

Getting Connected

RGB/Component Video HD Outputs

What you will need:

•1 RGB cable

•A High-Deﬁnition TV with RGB or Component (Y, Pb, Pr) video inputs

1.Connect one end of the RGB/Y,Pb,Pr cable to the Y/R, Pb/G, Pr/B jacks on the DVG-777K’s rear panel

2.Connect the other end of the RGB/Y,Pb,Pr cable to the RGB or Y, Pb, Pr inputs on a High Deﬁnition TV

NOTE: When using the Component output, the DVG-777K must be set to YPBPR output. See “Changing the Video Output Mode” in the Operations section of this manual for detailed instructions on setting the DVG-777K to YPBPR Mode.

VGA output

What you will need:

•1 VGA Cable

•A TV or video monitor with a VGA input

1.Connect one end of the S-Video cable to the S-Video output on the rear panel of the DVG-777K

2.Connect the other end of the S-Video cable to an S-Video input jack on a TV or monitor

NOTE: When using the VGA output, the DVG-777K must be set to VGA output. See “Changing the Video Output Mode” in the Operations section of this manual for detailed instructions on setting the DVG-777K to VGA Mode.

What you will need:

•1 SCART cable

•A TV or video monitor with a SCART input

1.Connect one end of the SCART cable to the SCART output on the rear panel of the DVG-777K

2.Connect the other end of the SCART cable to a SCART input jack on a TV or monitor

NOTE: When using the SCART output, the DVG-777K must be set to SCART output. See “Changing the Video Output Mode” in the Operations section

of this manual for detailed instructions on setting the DVG-777K to SCART Mode.

��

VocoPro DVG-777K owner manual Scart

Models: DVG-777K

Getting Connected

SCART