![](/images/new-backgrounds/1132798/13279895x1.webp)
Troubleshooting
Troubleshooting
Step 5: Access the
How do I configure TCP/IP settings for my computer to connect to the IP8100 series telephone?
Note: The following information assumes the computer is connected to the PC Port on the IP8100 series telephone.
Win98/ME:
Step 1: From the Desktop,
Step 2: Highlight TCP/IP and then click the Properties button. If you have more than one adapter installed, then there will be a TCP/IP entry for each adapter. Highlight TCP/IP > [your network adapter] and then click Properties.
Step 3: Make sure the IP Address tab is selected. Configure the adapter to Obtain an IP address. Then, Click OK out to the desktop to apply the changes. Reboot the computer when prompted. When the computer reboots it should request, and obtain, a valid IP address from the IP8100 series telephone. Included in the troubleshooting section of this manual is more detailed information on checking your IP address.
Win2k/XP:
Step 1 - Win2k: From the Desktop,
Step 1 - WinXP: Click on Start > Control Panel > Network and Internet Connections > Network connections.
Step 2:
Step 3: Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4: Configure the adapter to Obtain an IP address. Then, Click OK out to the desktop to apply the changes and reboot the computer when prompted. If you are not prompted to reboot the computer, you may need to renew the IP address of the computer manually. Included in the troubleshooting section of this manual is more detailed information on checking your IP address.
46