
Installation of Battery Pack in Handset
Follow the steps below:
1.Remove the battery cover by
1 | 3 | pressing on the indent and | |
sliding downward. | |||
| |||
|
|
2.Place the new battery pack in
the Handset with the metal contacts aligned with the charge contacts in the battery compartment.
3.Replace the battery cover by
| sliding it upwards. |
4. | If the new battery pack is not |
| already charged, place the |
| Handset in the charger, and allow it |
2 | to charge for 12 hours. After initial |
charge, a maintenance charge of 8 |
hours should be sufficient.
As you register additional Handsets to the system, they will be assigned extension numbers in the following order: HANDSET 2, HANDSET 3, HANDSET 4, and so forth.
Whenever a charged Handset battery pack is installed, the Handset will automatically begin SEARCHING FOR BASE (if previously registered), or it will prompt you to ENTER BASE ID to register the new Handset.
BEFORE USING YOUR HANDSET(S), CAREFULLY PEEL OFF THE PROTECTIVE FILM, COVERING THE DISPLAY.
5