BASIC OPERATION
Base Settings
To access Base Settings, with the Base in the idle (OFF) mode, press MENU, scroll down to BASE SETTINGS, then press OK.You can now access the following setting options:
•RINGER VOLUME
•RINGER MELODY
•KEYPAD TONE
•TONE/PULSE
•CONTRAST
•LANGUAGE
Press CLEAR at any time to back out of Base Settings mode.
RINGER VOLUME
To adjust the Base Unit ringer volume:
• Press MENU. Scroll down to BASE SETTINGS, then press OK. RINGER VOLUME will be highlighted. Press OK again. You will see a graph on the Base display indicating the relative volume setting.
•Press 
to lower the ringer volume. At the lowest setting (graph is completely clear), the Base will not ring when a call comes in.
•Press 
to raise the volume. At the loudest setting, the graph is completely shaded in.
•Press OK to confirm your setting.
RINGER MELODY
There are 8 Base ringer melody choices. To change the melody:
•Press MENU. Scroll down to BASE SETTINGS, then press OK. Scroll down to RINGER MELODY.
•Press OK. Use the either scroll key to sample the melodies.
• Press OK to confirm your selection.
24
