GETTING STARTED
Registration and Operation
Expand your VT5831 system by adding accessory Handsets. Bring telephone service to rooms where a phone jack isn’t available!
Registration and Operation Of The VTech VT5820 Accessory Handset
Your VTech VT5831 system can operate up to 6 Handsets.
The VT5820 accessory Handset consists of the following:
Handset Charger
Telephone Line Cord
| Belt Clip | Charger Wall |
Handset | Battery Pack Mounting Bracket |
1
3
5
Setup Of The VT5820 Accessory Handset
1.Plug the AC power adapter into an electrical outlet.
2.Remove the Handset battery cover by pressing on the indent and sliding downward.
3.Place the new battery pack in the Handset, with the metal contacts aligned with the charge contacts in the battery compartment.
4.Replace the battery cover by sliding it upward.
5.Place the Handset in the Charger, and allow it to charge for 12 hours. After the initial charge, a maintenance charge of 8 hours should be sufficient.
12
