Basic Operation
Answering System Operation
Setting Up Your Answering System
You can set up one feature at a time, or you can set up a feature and then move on to set up another feature.
1.Make sure the answering system is ON.
2.Press MENU until the system announces the feature you want to set. Refer to the Feature Summary below for a description of the features and your choices.
3.Press CHANGE until the system announces the desired setting.
4.Press TIME/SET to confirm your selection.
5.Press MENU to move on to the next feature, or press a MAILBOX button to exit Feature Setup.
Feature Summary
DefaultSystemsettingsannounces:indicat d by * .Description/directions:
“Set Security Code” | Use CHANGE to choose the remote access code | |
50 | * | you will use to access features and functions of the |
| answering system from a touch tone phone. You can | |
|
| |
|
| select any two digit code, from 40 to 99. |
“Set Audible Message Alert ” When message alert is turned on, the base beeps
Off * | once every 10 seconds when new messages | ||
On | have been received. | ||
|
|
|
|
“Set Announce Only” | When you turn Announce Only On, callers hear | ||
Off * | your announcement, but cannot leave a message. | ||
On |
|
|
|
|
|
| |
“Set Base Ringer” | Turn the base ringer on or off. | ||
On * |
|
|
|
Off |
|
|
|
|
|
| |
“Set Number of Rings” | Choose how many times the phone will ring | ||
2 | before the system answers a call. | ||
4 * | With toll saver active, the system answers after two | ||
6 | rings when you have new messages and after | ||
Toll Saver | four rings when you have no new messages. | ||
NOTES:
1.To advance the remote access code by increments of 10, press and hold
CHANGE.
2.You can exit feature setup at any time by pressing a MAILBOX button.
26
26 | 11/1/2005, 12:46 PM |
