Common cure for electronic equipment | VTech Cordless Telephone

In Case of Difficulty

You hear noise in the handset, and none of the keys or buttons work

•Make sure the power cord is plugged in.

Common cure for electronic equipment

If the unit does not seem to be responding normally, then try putting the handset in its base. If it does not seem to respond, do the following (in the order listed):

1.Disconnect the power to the base.

2.Disconnect the handset battery.

3.Wait a few minutes.

4.Connect power to the base.

5.Reinstall the battery.

6.Wait for the handset to re-establish its link with the base. To be safe, allow up to one minute for this to take place.

Your answering system is not recording messages

•Make sure system is turned ON (the ON/OFF key is illuminated).

•Make sure Announce Only feature is set to OFF.

You cannot hear recorded messages

•Using the base volume control, raise the volume to a comfortable listening level.

CL is flashing in the base message window display

•You need to set the day and time. Refer to the section on Set the Clock in this user’s manual.

Additional Information

34

91-000171-030-000 manual.pmd

34

11/1/2005, 12:46 PM

Image 34

VTech Cordless Telephone manual Common cure for electronic equipment, Your answering system is not recording messages

Contents

Need HELP? Important Safety Instructions Important Safety Instructions Before You Begin Parts Check List Handset Layout LCD Base Unit Layout Installation Before You Install Table/Desk Installation Installation Telephone Operation Hold Use/Charging Charging Temporary Tone Dialing Handset Ringer Style/Battery SaveCall Forward There is a call coming Battery needs to be rechargedDisplay Screen Messages Handset is waiting for a dial tone Telephone Memory Store a Number/Name in Memory Dial a Memory Number Edit a Number/Name Stored in MemoryDelete a Number/Name Stored in Memory Basic Operation Reassign Locations in Memory Telephone Directory Store a Number/Name in the Directory Edit a Number/Name Stored in the Directory Delete a Number/Name Stored in the Directory Move a Number/Name to the Memory Dial a Number from the Directory Review Call History Caller ID OperationAbout Call History Caller ID Delete Records from Call History Dial a Displayed Number Locate the record in call history that you want to dial Store a Call History Record in the Directory Dial Program Answering System Operation Audible IndicatorsSetting the Clock About Mailboxes To Review Your Announcement at Any Time Record Your AnnouncementTo Delete Your Announcement Rings when you have new messages and after Setting Up Your Answering SystemFeature Summary Toll Saver Four rings when you have no new messages Play Messages Adjust Playback VolumeListen to, Save & Delete Messages Delete Messages Record a Memo Message Window DisplayCall Screening/Intercept Press REC/MEMO Connect with the Answering System From a Remote Location Remote Access CommandsVoice Menu Function Replacing the Handset Battery Battery Care and MaintenanceBatteries Headset Jack Headset OperationBelt Clip Case of Difficulty Handset does not ring when you receive a callYou hear other calls while using your phone Phone doesn’t work at all You cannot hear recorded messages Common cure for electronic equipmentYour answering system is not recording messages CL is flashing in the base message window display Maintenance How long is the limited warranty period? Warranty StatementWhat does this limited warranty cover? What is not covered by this limited warranty? How do you get warranty service? Other Limitations Warranty Statement FCC Part 68 and Acta FCC, Acta and IC RegulationsFCC Part VTech Communications, Inc Rights of the telephone company IC Industry Canada FCC, Acta and IC Regulations Rbrc Seal Technical Specifications Nominal Effective Range Table Of Contents Additional Information Issued