VTech IA5879 manual Power connection, Telephone line connection, Data port, Desk bracket

Installation

• Use only the base

power adaptor

supplied with this

product.

• If your home has

specially wired

alarm equipment

connected to the

phone line, be sure

that installing the

system does not

disable your alarm

equipment.. If you

have questions

about what will

disable alarm

equipment, contact

your telephone

company or a

qualified installer.

• If the battery has

not been previously

Power connection

Plug the connector of the base power adaptor to the connector jack at the bottom of the base unit.. Then plug the adaptor into an electrical outlet not controlled by a wall switch..

Telephone line connection

Two-line wall jack

1.Use the four-wire (RJ-14) line cord..

2.Connect the telephone line cord from the jack labeled L1/L1+L2 on the base to the wall jack..

Separate wall jacks

1.Use both telephone line cords..

2.Connect the line cord from the jack labeled L1/L1+L2 at the bottom of the base to the wall jack designated as line 1..

3.Connect the other telephone line cord already plugged into the jack labeled L2 at the bottom of the base to the other wall jack..

4.Ensure the plugs are secured firmly into place.

Data port

Telephone	Standard
jack	electrical
	outlet

Examples of 1-Line and 2-Line Cords

RJ-11	RJ-14
One line	2 line
cord	cord

charged, place

the handset in the

base, and allow

it to charge for at

least 16 hours..

The data port at the bottom of the base unit provides an easy way to connect the fax machine, laptop computer, modem, or other telephone devices for direct access to LINE 2.. The data port only provides access to line 2, so it is necessary to have an active line connected to the line 2 jack at the bottom of the base unit.. Connect a phone cord from the data port (marked DATA at the bottom of the base unit) to your fax, laptop, etc..

Desk bracket

Make sure all telephone and power cords are installed before inserting the desk bracket to the bottom of the base unit..

1. Turn the base unit upside down..

www.vtechphones.com