Telephone operation
Handset operation
1..Answering a call
Press LINE 1 or LINE 2 to answer a call..
2.Making a call
Press LINE 1 or LINE 2, then dial the number..
Dial the number (use 
to back- space and make corrections), then press LINE1 or LINE2 to call..
To end your call, press the ap- propriate LINE key, or place the handset in its base..
3.Hold
Press to put a call on hold.. Press appropriate LINE key to release hold..
Use the extension to pick up the call
4.Remove
When viewing the caller ID log, press to delete the current re- cord displayed.. While handset is in idle mode, press and hold to
delete all records in the call log..
5..
/CID and 
/DIR
/CID
•While LINE 1 or LINE 2 is on hold, press to select to enter the conference mode or make an intercom call..
•While on a call, press to de- crease the volume.. A double beep will sound when you reach the lowest setting..
•While phone is not in use, press to display caller ID information..
•While entering names or numbers into memory, press to delete last character
entered.. 
/DIR
•While on a call, press to in- crease the volume.. A double beep will sound when you reach the highest setting..
•While phone is not in use, press to display directory entries..
•While entering names or numbers, press to add a space..
•While L1 or L2 is on hold, press to select to enter a conference call or make an intercom call.
6.Select
Press to display menu, or to select highlighted item from menu..
Intercom
With the base in idle, press to page the base.. Press again, or place handset in the base to cancel the page..
7.Flash/call waiting
During a call, press to receive an incoming call, if call waiting is activated..
8.Redial/pause
Press to view redial memory..
While entering numbers, press to insert a dialing pause..
9.Program
With the handset idle
While the phone is in the intercom or conference mode, press Program and press SEL/INT to change the channel for better reception..
5
1 
6
2 | 7 |
|
3,4 | 8 |
| 9 |
10 | www.vtechphones.com |
