•The entries you store in speed dial memory are marked from 01 to 09 and also displayed in the directory..
•Press and hold PROG anytime to exit speed dial mode..
•When the memory is full, the screen displays
MEMORY FULL, an error tone sounds and you cannot store
a new number until you delete a record from speed dial memory or the directory..
Speed dial
Your phone can store up to nine telephone numbers with names (up to 15 characters and 24 digits in each location) in the speed dial memory locations you assign (numbered 1 through 9) in each handset.. These numbers can be dialed with the pressing of two buttons presses.. You can also store telephone numbers with names alphabetically in the directory.. See Telephone Directory for instructions..
Store a speed dial entry
1..Press PROG on the handset.. Then press 
or 
until the screen displays SPEED DIAL.
2..Press SEL/INT.. The screen displays ENTER
3.Press the key (1 through 9) to assign the speed dial location this number will be stored.. The screen displays ENTER NAME..
4.Using the chart below, enter up to 15 characters for the name you’re storing.. Use
to backspace and make corrections; use 
to advance and add a space..
Presses
Dial key Once Twice 3 times 4 times 5 times 6 times
11
2 | A | B | C | 2 |
|
3 | D | E | F | 3 |
|
4 | G | H | I | 4 |
|
5 | J | K | L | 5 |
|
6 | M | N | O | 6 |
|
7 | P | Q | R | S | 7 |
8 | T | U | V | 8 |
|
9 | W | X | Y | Z | 9 |
00
* | * |
|
|
|
|
|
# | & | ‘ | , | - | .. | # |
16 | www.vtechphones.com |
