pg44 | Adding and using additional base stations |
Troubleshooting
pg45
1
2
3
4
5
Choosing the active base station
You can only make intercom calls between handsets that are registered to the same base station.
1 LOUNGE
Press
Press several times until the display says
▼HS SETTINGS
Press
▼AUDIO
Press
6
7
8
9
10
Press once
▼SELECT BASE
Press
Press until the display shows the base station you want to be active
Press
STORED
The base letter flashes and the display says
B
SELECT BASE
Press and hold to leave the HS SETTING menu
There’s no dial tone
Check
the phone line cord is securely
connected at the handset and base station
the phone cord is not damaged
the power at the base station is on
the handset batteries are properly fitted and fully charged
the handset is registered to the base station. Press the page button on the base station to ensure the handset responds.
If the handset responds, it is registered to the base station
you have paid your phone bill.
If none of these checks work, ask your service provider to test the line.
There’s no display on the handset
Check the handset battery is properly fitted and fully charged. See page 11 for details on switching the handset on.
My handset doesn’t ring
Check
the handset is switched on
the handset is registered to the base station
the handset is within range of the base station
the base station is active – check the correct base station is active if you have more than one.
My base station doesn’t ring
Check:
the power switch at the base station is on and live
the base ringer is set to ON
the phone line cord is securely connected and not damaged.
7 Adding and using additional base stations
