pg8
55mm
1 Setting up
Setting up
Fixing your Mirage phone to a wall
Your phone comes with two wall fitting screws and plugs. Make sure the plugs supplied are suitable for your wall.
To fix your Mirage phone to a wall:
1 Use this template as a guide to mark the wall before drilling
Check
•that the leads reach your telephone socket and mains power supply
•that the handset will not be damaged or cause damage if it is accidently knocked off it’s base station
•the position guidelines given in this setting up guide
2Use a spirit level or plumb line to ensure the phone will hang straight
3Drill two holes where you have marked, insert the wall plugs and screws – leaving a 3mm gap between the head of the screw and the wall
4Slide the base station onto the screws
•make sure you don’t cut the telephone line or power cord, this will damage your phone and invalidate your warranty
pg9
Your phone comes with three different coloured handset covers. To change a cover:
1Gently squeeze the arrows marked on either side of the screen
2 Lift the cover and slide it away from the keypad
3Fit the two tabs at the top of the new cover into the slots on the top of the handset
4 Click the cover into place.
1 Setting up
