PICK (Call Pickup – Group)

Permits a station user to answer any calls directed to other lines in the user’s preset Call Pickup Group.

CONF (Three-way Calling)

Enables a station user to establish a three-way conference by connecting an additional party to an already existing conversation.

VOICE (Voice Call)

Enables the user to make a call to the called party’s built-in speaker. If the called party’s MIC is on, the called party can converse on hands-free.

S-SPD (Speed Calling – System)

Allows a station user to call certain frequently dialed numbers using fewer digits (abbreviated call codes) than would normally be required.

CAS (CAS-Switch Hook Flash)

Allows the user to send a switchhook flash while on an outside trunk.

UCDBO (UCD Busy Out)

Allows a station user to block UCD calls and to cancel Busy Out.

FLASH (Flash)

Provides the station with a switchhook flash.

FDN (Call Forward – No Answer)

Permits a call to an unanswered station to be forwarded to a predesignated station if the called station does not answer within a predetermined period of time.

C-RPT (ISDN Malicious Call Trace)

Allows the user to initiate a Call Trace on ISDN calls only.

G-SPD (Speed Calling – Group)

Allows a station user to share a set of common Speed Calling numbers with other station users in the group.

P-RLS (Privacy Release)

Allows another station to depress a busy line button and enter the conversation of a station already engaged in com- munication.

DND (Do Not Disturb)

Allows a station user to deny access to the station line for incoming calls.

– 22 –

Page 26
Image 26
VTech NEAX 2400 IPX manual Pick Call Pickup Group, Conf Three-way Calling, Voice Voice Call, SPD Speed Calling System