REPLACING THE BATTERY PACK

Follow the steps below:

1.Remove the battery case cover by pressing on the ridged lines and sliding downward.

PRESS and SLIDE

DOWNWARD

2.Discard the old battery pack. Don’t put the old battery pack in a trash compactor or a fire - it could burst.

3.Place the new battery pack in its housing with the metal contacts facing down.

PLACE THE NEW

BATTERY PACK

INTO THE

BATTER

COMPARTMENT

PLEASE NOTE THE

CORRECT POSITION

OF THE BATTERY

PACK WHEN

CHANGING BATTERY

4.Replace the battery case cover by sliding the cover upwards.

SLIDE IN THE

BATTERY

COVER

5.If the new battery pack is not already charged, place the hand- set in the cradle of the base unit to allow it to charge for 16 hours.

CAUTION:

To Reduce the Risk of Fire or Injury to parsons, read and Follow the Instructions

1.Use only VTECH rechargeable battery pack.

2.Do not dispose of the battery in a fire. The cell may explode.

IMPORTANT: Do not dispose of this battery into household garbage. For information on recycling or proper disposal, consult your local solid waste collection or disposal organization.

3.Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

10

1920manual

10

1/28/99, 3:27 PM

Page 10
Image 10
VTech VT 1920C manual Replace the battery case cover by sliding the cover upwards