QUICK REFERENCE GUIDE
SET-UP
•Plug AC adaptor into a standard electrical outlet and Base Unit
•Set Dial Mode switch to PULSE or TONE. The unit is factory set to TONE.
•Let the handset battery pack charge for 16 hours before first use.
•Connect telephone line cord to base unit and telephone jack.
MAKING CALLS
•Press the PHONE key. When the "PHONE ON" indicator is displayed and you hear a dial tone, dial the number.
OR
•Enter the number to be dialed on the LCD and then press the PHONE key.
TO MUTE A CALL
•Press MUTE to disable the handset microphone.
• Press MUTE again to return to normal two way conuersation.
TO PAGE THE HANDSET
•To page from the base, press
PAGE .
•To cancel the PAGE either press PAGE again on the base or press OFF on the handset.
STORING MEMORY (SPEED) DIAL NUMBERS:
•The phone should be OFF.
•Enter the number you wish to store on the LCD up to a maximum of 20 digits.
ANSWERING CALLS
•To answer a call, press any key other than OFF , MUTE , or the Volume Keys. The handset will NOT
HANGING UP
•Press OFF or place the handset in the cradle to hang up a call.
FLASH
| PAUSE |
|
PHONE | HOLD | OFF |
|
| |
1 | 2 abc | 3 def |
4 ghi | 5 jkl | 6 mno |
7 pqrs | 8 tuv | 9 wxyz |
* | 0 oper | # |
tone |
MEM CID REDIAL
PROG CLR/DEL MUTE
STORING
THE PHONE SHOULD BE
OFF
ENTER PHONE NUMBER
PRESS PROG
YOU WILL SEE
ENTER MEMORY
LOCATION
TO PLACE A CALL ON HOLD
•Press HOLD on the handset to place an active call on hold. Press HOLD again to return to the call.
•Press PROG . The LCD will display "PROGRAM LOCATION "
•Enter a two digit memory location (01 .. 20), the unit will store the number, emit a happy tone to confirm successful programming and exit program mode.
19
1920manual | 19 | 1/28/99, 3:27 PM |
