THE BASE UNIT LAYOUT | QUICK REFERENCE GUIDE |
THE BASE UNIT FEATURES
+
!
9V DC | TEL. LINE |
AC POWER JACK
PHONE CORD JACK
SET-UP
•Plug AC adapter into a standard electrical outlet and Base Unit
•Set Dial Mode switch to PULSE or TONE. The unit is factory set to TONE.
•Let the handset battery pack charge for 16 hours before first use.
•Connect telephone line cord to base unit and telephone jack.
MAKING CALLS
•Press the PHONE key. When the "PHONE ON" indicator is displayed and you hear a dial tone, dial the number.
OR
•Enter the number to be dialed on the LCD and then press the PHONE key.
ANSWERING CALLS
TO MUTE A CALL
•Press MUTE to disable the handset microphone.
• | Press | MUTE again to return to |
| normal two way conuersation. | |
TO PAGE THE HANDSET | ||
• | To page from the base, | |
| press | PAGE . |
•To cancel the PAGE either press PAGE again on the base or press OFF on the handset.
STORING MEMORY (SPEED) DIAL NUMBERS:
•The phone should be OFF.
•Enter the number you wish to store on the LCD up to a maximum of 20 digits.
STORING |
THE PHONE SHOULD BE |
TONE/PULSE SELECTOR
HS IN USE CHARGING SPARE BATT
MEMORY DIALING
111
212
313
414
515
6 | 16 | DIGITAL |
7 | 17 | CORDLESS900MHZ |
8 | 18 | VT1922 |
919
1020
PAGE
ANTENNA
SPARE BATTERY INDICATOR HANDSET CHARGE INDICATOR IN USE INDICATOR
MEMORY DIALING DIRECTORY
BATTERY COMPARTMENT
PAGE KEY
CHARGING CONTACTS
•To answer a call, press any key other than OFF , MUTE , or the Volume Keys. The handset will NOT
HANGING UP
•Press OFF or place the handset in the cradle to hang up a call.
TO PLACE A CALL ON HOLD
• Press HOLD on the handset to place an active call on hold. Press HOLD again to return to the call.
OFF |
ENTER PHONE NUMBER |
PRESS |
YOU WILL SEE |
ENTER MEMORY |
LOCATION |
•Press PROG . The LCD will display "PROGRAM LOCATION "
•Enter a two digit memory location (01 .. 20), the unit will store the number, emit a happy tone to confirm successful programming and exit program mode.
18 | 19 |