VTech VT 1922 manual Advanced Functions, Call Waiting, Cid-Caller Id

ADVANCED FUNCTIONS

ADVANCED FUNCTIONS

CALL WAITING

While you are on a call, you will hear an alert signal, warning that a second caller is trying to reach you. CALL WAITING is a subscription service, available from most local telephone service providers. Contact your provider for details.

If you subscribe to this service linked with CALLER ID (CID), the name and/ or phone number of the second caller can be displayed on the LCD immediately after hearing the CALL WAITING alert. For more details, see

CID-CALLER ID.

Switching calls using FLASH

•To switch over to the new call, press the PHONE key; the first call is put on hold.

•To switch back to the first call, press the PHONE key again.

SWITCHING CALLS

TO SWITCH OVER TO

THE NEW CALL

PRESS PHONE

First, dial the call normally. Then activate the Temporary Tone feature by pressing TONE (the ( *) key). You can then press the numbers or symbols you need, and your phone will send the proper signals.

To end the call, press OFF or place the handset back in the base. The phone will automatically go back to rotary (dial-pulse) service.

TEMPORARY TONE

DIAL YOUR

NUMBER

PRESS

PRESS THE NUMBERS

OR SYMBOLS

PRESS OFF

Programming The Ringer

The handset ringer is capable of four different types of ringer tones. The following sections detail how to select different ringer types and how to turn off the handset ringer.

Changing Ringer Types

To program, the handset must be OFF.

To select a different ringer type do the following:

CHANGING RINGER

TYPES

PRESS

PRESS

PRESS

PRESS OFF

Press: PROG

Press: #

Press: 1 for ringer type 1 2 for ringer type 2 3 for ringer type 3 4 for ringer type 4

The handset LCD will show the ringer type selected, for example

TURNING OFF THE
RINGER
PRESS
PRESS
PRESS
PRESS	to exit

Checking The Ringer Type

To test the present ringer type, do the following:

CHECKING THE RINGER
PRESS
PRESS
PRESS	AGAIN
PRESS

TO SWITCH BACK TO

THE FIRST CALL

PRESS PHONE AGAIN

Press PROG or OFF to exit.

CLR/DEL Key Function

The CLEAR and DELETE functions can be accessed separately depending on how long the key is held down. For example, to clear the last digit entered on the display, press the CLR/DEL

Temporary Tone

If you have rotary (dial-pulse) telephone service (TONE/PULSE switch is set to PULSE), this feature allows you to temporarily switch to TONE dialing for such purposes as remote access to answering machines, bank-by-phone services, use of calling cards and other special

Turning Off The Ringer

To turn off the ringer do the following:

key for less than 1 second. Press and hold the CLR/DEL key for more than 1 second to completely clear the LCD.

The DELETE function is also used to delete CID and memory dial records, see DELETING STORED NUMBERS, and DELETING NUMBERS.

22 23