Getting Started, Setting Up Your VT, Handset Ringer | VTech VT 1962

GETTING STARTED

Setting Up Your VT 1962

Choose an area near an electrical outlet and a telephone wall jack.

AC Power Adapter

Plug the AC power adaptor into an electrical outlet and the DC connector to the back of the Base Unit.

TELEPHONE

WALL JACK

AC

OUTLET

CAUTION:

Use only CLASS 2 9V DC POWER SUPPLY included with your phone.

Setting the Tone/Pulse Switch

The TONE/PULSE switch is located on the bottom of the Base Unit and is factory set to TONE. If you have touch tone service, do not change the switch setting. If you have rotary (Pulse) service, set the switch to PULSE.

TONE PULSE

Tone/Pulse Selector

Charge the Handset battery pack before use. The battery pack recharges automatically whenever the Handset is in the Base Unit. The batteries must be charged for 16 hours before using your phone for the first time.

Handset Ringer

The Handset ringer is programmed ON as the factory default setting. Refer to PROGRAMMING THE RINGER on page 22 for more information.

Charge the Handset Battery Pack for 16 hours before using

CHARGI

MA

DELETE

REPEAT

13

Image 13

VTech VT 1962 manual Getting Started, Setting Up Your VT, AC Power Adapter, Setting the Tone/Pulse Switch, Handset Ringer

Contents

Introduction MHz Operation Special Features Parts Check List FCC Part FCC and IC Regulations This telephone is registered for use in Canada IC Industry Canada FCC and IC Regulations Read and understand all instructions Important Safety Instructions If the product exhibits a distinct change in performance Charging The Handset Battery Pack Replacing the Battery PackTo Charge The Battery Pack Its Impossible To Over-Charge The Battery Pack Replace the battery case cover by sliding the cover upwards Installation Spare Battery ChargerPower Backup Replacing a Drained Handset battery Rbrctm Seal The Rbrcr Seal on the nickel-cadmium battery AC Power Adapter Setting Up Your VTSetting the Tone/Pulse Switch Getting Started Connect Telephone Line Cord Wall Mounting Using The Wall Mount Adapter LCD Display Messages LCD Display Handset Layout Handset Features Base Unit Layout Base Unit Features Quick Reference Guide Memory Dialing Speed Dialing Using RedialCID Caller ID To exit press OFF Basic Operation Advanced Functions Switching calls using FlashCall Waiting Temporary Tone Turning Off The Ringer Changing Ringer TypesChecking The Ringer Type To turn off the ringer do the following Advanced Dialing CLR/DEL Key Function Dialing From Memory Memory DialingIf programming is unsuccessful the unit will display Press Phone to get a line Deleting Stored Numbers Changing Stored NumbersStoring Special Codes Call Waiting Caller ID Type II CID CID-CALLER IDWord About Caller ID CID Receiving and Storing Calls Transmission Error Special Message Indicators Out of Area CallsPrivate Calls Reviewing CID Records Reviewing Numbers Deleting Numbers Default Answering System Settings Answering System SetupAnswering System Program- ming Overview Set Outgoing Message OGM Day and Time Security code default setting is Set Announce Only Set Audible Message Alert Set Number of Rings Set Base Ringer On/OffBase ringer can be turned on or OFF Leaving a Message Incoming Message Answering System OperationsListening to Messages / Memos Saving Messages Turning the Answering Machine Deleting Messages Call Screening Changing Speaker VolumeCheck Current Day and Time Changing Playback Speed Memory Full Power Failure Flashing number LED displays What it meansYou have no new messages Playing Messages Remotely Remote Operation of Answering System Skip Messages During Playback Repeat Messages During PlaybackStop Message Playback Memo Recording Exiting Remote Operation Additional Operating Tips Operation Headset OperationBelt Clip Maintenance You Hear Other Calls While Using Your Phone Handset Does Not Ring When You Receive a CallCase of Difficulty Phone Doesnt Work At All Common Cure For Electronic Equipment Any defect in material or workmanship Warranty StatementTo the original purchaser only ONE Year At our option, repair or replace your unit What does OUR Warranty not COVER? Crystal Controlled Dual PLL Synthesizer Technical SpecificationsHandset 295 grams Base 470 grams Table of Contents Issue