ANSWERING SYSTEM SETUP
Note: You can store one OGM for Announce Only mode, and a separate OGM for Normal (accept messages) mode. The appropriate OGM will be played based on how you set Announce Only.
Set Base Ringer On/Off
The Base ringer can be turned ON or OFF.
|
|
| Setting the Base | |
|
|
| Ringer |
|
|
| ANSWER |
|
|
| MEMO | ON/OFF | Press MENU | |
|
|
| ||
CHARGING | SPARE | IN USE |
|
|
BATTERY | Press SELECT | |||
|
|
| ||
MAIL BOX1 | MAIL BOX2 | MAIL BOX3 |
|
|
| PLAY/STOP |
| Press | TIME/SET |
DELETE | TIME/SET SELECT | MENU |
| |
REPEAT/SLOW | SKIP/QUICK | VOLUME |
|
|
PAGE
1.Press MENU until you hear "Set Base Ringer"
2.Press SELECT to toggle between ON or OFF.
3.Press TIME/SET to confirm your selection. Voice prompt of "Base Ringer is ON" or "Base Ringer is OFF" will be announced to confirm your setting.
Set Number of Rings
The Answering System has 4 ring type settings:
2 rings The incoming call is answered after 2 rings.
4 rings The incoming call is answered after 4 rings.
6 rings The incomng call is answered after 6 rings.
Toll Saver The incoming call is answered after 2 rings only if there are new messages/ memos present. Otherwise, the call is answered after 4 rings. This may help you avoid long distance charges when retrieving messages remotely.
|
|
| Setting Number of | |
|
|
| Ringer |
|
|
| ANSWER |
|
|
| MEMO | ON/OFF | Press MENU | |
|
|
| ||
CHARGING | SPARE | IN USE |
|
|
BATTERY | Press SELECT | |||
|
|
| ||
MAIL BOX1 | MAIL BOX2 | MAIL BOX3 |
|
|
| PLAY/STOP |
| Press | TIME/SET |
DELETE | TIME/SET SELECT | MENU |
| |
REPEAT/SLOW | SKIP/QUICK | VOLUME |
|
|
PAGE
1.Press MENU until you hear "Set number of rings."
2.Press SELECT until you hear the desired setting "2", "4", "6", or "Toll Saver".
3.Press TIME/SET to confirm your choice. The selected setting is then announced.
34
