ADVANCED FUNCTIONS

CLR/DEL Key Function

The CLEAR and DELETE functions can be accessed separately depending on how long the key is held down. For example, to clear the last digit entered on the display, press the CLR/DEL key for less than 1 second. Press and hold the CLR/DEL key for more than 1 second to completely clear the LCD.

The DELETE function is also used to delete CID and memory dial records, see DELETING STORED NUMBERS, and DELETING NUMBERS.

Advanced Dialing

There are two different ways to dial a number:

1.Press PHONE key and wait for a dial tone. Then dial the number you want either manually, using MEMORY (MEM) dialing, CID dialing or REDIAL.

OR

2.Enter the number you wish to dial on the display first. Then press PHONE key. This will dial the number which is displayed on the LCD after 2 seconds.

NOTE: The phone will dial any number which is shown on the display. If you do not want to dial the number shown on the LCD, it can be changed by:

Press and hold CLR/DEL until the display is cleared, then dial normally.

or

Press OFF and start over.

24

Page 24
Image 24
VTech VT 1962 manual CLR/DEL Key Function, Advanced Dialing