HANDSET FEATURES
INT.COM/LOW
BATT LED
*It will flash when INT.COM key is pressed on the Base or Handset.
*It will illuminate during Intercom mode.
*It will flash slowly if handset battery level is low.
LINE1 KEY
*Press this key to make or answer a call on LINE1.
*Press this key during a call on LINE1 to Flash the line.
TONE/* KEY
*In PULSE dialing mode, this key is used to switch to Temporary TONE dialing mode
HOLD KEY
*When the Handset is in use, press this key to hold the line. To release
H O L D, p r e s s t h e appropriate LINE key.
PGM/MEM KEY
* In Handset idle mode, |
press this key to enter |
VOLUME SWITCH Set earpiece volume to high, medium or low, depending on your preference.
INT.COM/LOW BATT |
| 900MHz |
|
| CORDLESS |
LINE 1 | OFF | LINE 2 |
FLASHFLASH
12ABC 3DEF
4GHI 5JKL 6MNO
7PQRS 8TUV 9WXYZ
TONE | 0OPER |
|
HOLD | CHAN | INT.COM |
PGM | CONF | REDIAL |
MEM |
| PAUSE |
OFF KEY
*Press this key to exit all modes.
HEADSET JACK
*C o n n e c t a 2 . 5 m m headset to the jack for hands free operation.
LINE2 KEY
*Press this key to make or answer a call on LINE2.
*Press this key during a call on LINE2 to Flash the line.
INT.COM KEY
*Press this key to ring the Base Unit and establish an Intercom call.
CHAN KEY
*Pressing the CHAN key when the Handset is in use will activate a channel change to the next free channel. This is used if you are experiencing noise or interference on the current channel .
REDIAL/PAUSE KEY
*Press this key to dial the last number called on your Handset.
P R O G R A M m o d e . |
* Press this key to enter |
memory dial mode,after |
getting a dial tone. |
CONF KEY | * | During Speed Dial |
| programming, press | |
* Press this key to |
| |
| this key to insert a 2 | |
establish a Conference |
| |
call between LINE1 and |
| second PAUSE in the |
LINE2. |
| dialing sequence. |
10
