
OPERATING INSTRUCTIONS
2.Either party can leave the conver- sation by pressing OFF key.
To disconnect the call, both the Hand- set and the Base Unit must hang up . Otherwise the call will still remain con- nected.
USING THE INTERCOM
You can use your VT 9241 2 line cordless telephone as a
The Intercom function can be activated by either the Handset or the Base Unit.
From the Handset
1. Press INT.COM key.
TONE 0OPER
HOLD CHAN INT.COM
PGM CONF REDIAL
MEM | PAUSE |
2.The INT.COM/LOW BATT LED will illuminate and a tone will sound.
3.The Base will ring and the INT.COM/PAGE LED will light. It will then automatically enter Intercom mode.
4.Speak towards the microphone on the front edge of the Base Unit.
From the Base
1. Press INT.COM/PAGE on Base.
900MHZ |
|
|
CORDLESS |
|
|
VT9241 |
|
|
CONF | REDIAL | MUTE |
HOLD | MEMORY | INT.COM/PAGE |
|
| SPARE BATT |
POWER | CHARGE |
|
|
|
2.The INT.COM/PAGE LED on Base and the INT.COM/LOW BATT LED on Handset will blink and a tone will sound at Handset.
To exit Intercom mode at the Base Unit or Handset, press OFF.
3.To answer the page at the Hand- set, press INT.COM and speak with the person at the Base Unit.
NOTE:
1.The Handset will ring a maxi- mum of 60 seconds.
2.If the Handset is in use, it will ring only once.
To end the Intercom call at the Base or Handset, press OFF.
If you receive an Intercom/Page from the Base Unit while you are on a phone call on the Handset,
1.Press INT.COM key on Handset,
2.Intercom mode is active after a sig- nal is heard.
17