Vulcan-Hart 60L77R ML-52114 operation manual Location, Installation Codes And Standards, In Canada

LOCATION

CAUTION: The equipment area must be kept free and clear of combustible substances.

The range, when installed, must have a minimum clearance from combustible and non-combustible construction of 6" at the sides and 6" at the rear.

The installation location must allow adequate clearances for servicing and proper operation. A minimum front clearance of 40" is required.

The range must be installed so that the flow of combustion and ventilation air will not be obstructed. Adequate clearance for air openings into the combustion chamber must be provided. Make sure there is an adequate supply of air in the room to allow for combustion of the gas at the burners.

INSTALLATION CODES AND STANDARDS

In the United States of America:

1.State and local codes.

2.National Fuel Gas Code, ANSI-Z223.1 (latest edition). Copies may be obtained from The American Gas Association, Inc., 1515 Wilson Blvd., Arlington, VA 22209.

In Canada:

1.Local codes.

2.CAN/CGA-B149.1 Installation for Natural Gas Burning Appliances and Equipment (latest edition).

3.CAN/CGA-B149.2 Installation for Propane Burning Appliances and Equipment (latest edition). Copies may be obtained from The Canadian Gas Association, 55 Scarsdale Road, Don Mills, Ontario, Canada M3B2R3.

ASSEMBLY

Ranges Mounted on Casters

When ranges are mounted on casters, you must use a flexible connector (not supplied) that complies with the Standard for Connectors of Movable Gas Appliances, ANSI-Z21.69 (latest edition), and a quick-disconnect device that complies with the Standard for Quick-Disconnect Devices for Use With Gas Fuel, ANSI Z21.41 (latest edition).

Provide a gas line strain relief to limit movement of the range without depending on the connector and/ or any quick-disconnect device or its associated piping to limit movement of the range. Attach the gas line strain relief to the rear of the range (Fig. 2).

— 5 —