Oven Pilot
1.Turn main gas supply ON. Remove lower front panel and lift lighting hole cover.
2.Depress the reset button located behind the lower front panel and light pilot with a lit taper (Fig. 12). Continue to hold reset button in for 1 minute.
3.If pilot fails to light, turn main gas supply OFF and wait 5 minutes before repeating Steps 1 and 2.
4.After pilot is lit, turn the thermostat dial to the desired setting.
Fig. 12
Nightly Shutdown: Turn oven thermostat OFF.
Extended Shutdown
1.Turn oven thermostat OFF.
2.Turn main gas supply OFF.
Open Top Pilots
1.Remove all top section cover plates and griddles.
2.Turn main gas supply ON (all burner valve knobs should be in OFF position).
3.Begin from the left range top side. Light each individual pilot from front to rear across the entire range top section.
When lighting broiler/griddle section, the pilot is tubular in shape.
— 13 —
