1.Remove the control box cover plate. Mount suitable 123⁄32" (43.6mm) conduit fitting in knockout opening.
2.Connect field wire to the terminal block as indicated on the wiring diagram. The wiring diagram is located inside the wiring compartment at the rear of the tilting skillet. Wire must be of the type suitable for 90°C service.
3.After making the connections, replace the control box cover plate.
4.The tilting skillet must be grounded by installing a ground lead to the ground lug located inside the junction box.
ELECTRICAL DATA
Model
Phase
208V | 240V | 480V |
|
|
|
KW Amp | KW Amp KW | Amp |
VETRS35
3
18
50.0
18
43.3
18
21.6
SERVICE CONNECTIONS
— 5 —
