Vulcan-Hart ML-114826 Maintenance, Troubleshooting, Once A Day, Stainless Steel, Lubrication

Once A Day

Thoroughly clean the skillet with warm water and a mild detergent. Rinse thoroughly and wipe dry with a soft clean cloth.

Stainless Steel

Clean stainless steel surfaces with a damp cloth and polish with a soft dry cloth. To remove discolorations, use a non-abrasive cleaner.

MAINTENANCE

WARNING: THE TILTING SKILLET AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING OR SERVICING THE TILTING SKILLET.

WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE YOU ARE WORKING ON THE CIRCUIT.

LUBRICATION

Never grease or oil the pivot bearings as this may cause problems with tilting. Bearings are oilite and never require lubrication.

SERVICE AND PARTS INFORMATION

To obtain service and parts information concerning this tilting skillet, contact the Vulcan-Hart Service Agency in your area (refer to listing supplied with the skillet), or Vulcan-Hart Company Service Department at the address or phone number shown on the front cover of this manual.

	TROUBLESHOOTING
PROBLEM		POSSIBLE CAUSES
Skillet will not operate.		1. Power supply not on.
		2. Problem with thermostat or heating
		elements. Contact your local Vulcan-Hart
		authorized servicer.
Hot spot on pan bottom.		Problem with heating element. Contact your
		local Vulcan-Hart authorized servicer.
Skillet difficult to tilt.		Dirt in oilite bearings causing it to bind. Contact
		your local Vulcan-Hart authorized servicer.

FORM 31036 (4-98) — 8 — PRINTED IN U.S.A.