U N P A C K I N G T H E C I N T I Q S T A N D

When unpacking Cintiq, first unpack the modular display stand. Place the stand on your desktop or work surface, making sure the stand is stable and will not tip or fall when the Interactive Pen Display is mounted on it. Then familiarize yourself with the stand components.

CAUTION Do not operate the incline adjustment levers when Cintiq is not mounted on the stand, and do not

lift the stand by the adjustment levers; the stand is spring-loaded and may cause injury or damage if released without the weight of Cintiq on the stand. Improper operation may lead to physical injury or damage to the stand. Be careful to avoid catching your finger in the gap of the movable portion of the stand.

Incline Adjustment Levers When Cintiq is mounted on the stand, use these levers to adjust the display incline, as described in Adjusting the Cintiq Stand on page 28.

Bearing Recess

 

Front Feet

Rear Feet

The front feet have rubber

The rear feet have

pads to reduce stand

replaceable felt

slippage on the desktop

pads, allowing the

when adjusting incline.

feet to move when

 

adjusting incline.

The Cintiq stand supports the Interactive Pen Display unit. The stand can be used to adjust the incline angle of the display unit from a low position (13 degrees from horizontal) to a high position (70 degrees from horizontal). And, you can rotate Cintiq from landscape to portrait orientation, or to any angle between +180 and -180 degrees. The stand also allows easy removal of Cintiq for use in a semi-supported lap position.

Note: Whenever you are not using Cintiq in your lap, Cintiq must be stored in the stand to avoid damage to the display screen or cabling.

Please refer to Working with Cintiq on page 32 for more information.

Next Step: Unpack the Interactive Pen Display and mount it onto the Cintiq stand. See page 14

13