L A P M O D E

When working in lap mode, you can freely position Cintiq without the use of the stand. If you are not familiar with how to remove Cintiq from the display stand, refer to page 29 for details.

Hints:

■Set the display stand to the upright position so that you can use it as a tablet stand whenever Cintiq is not in use. You can also use the stand as a cable guide—this makes it easier to remove the display unit from the stand and to return it back to the stand.

■The rear side of the display unit has a flat upper surface for resting the unit securely against a straight desk edge.

Important: Do not place the display unit on the desk or any other surface by itself—this may bend, crimp, or otherwise damage the cable.

■Insert the main cable into the cable guide located at the back of Cintiq—this will reduce the possibility of placing undue stress on the cable when working with Cintiq.

■Make sure that you comfortably support the body of the display unit in your lap, and that the unit is not resting on the cable. If the unit rests on the cable, the cable will excessively bend or crimp and be damaged.

■Maintain a good posture at all times, and change your position if you feel any discomfort due to your work position or the weight of Cintiq.

■Do not pull the cable out of its computer connections by accidentally moving the Interactive Pen Display too far from the computer.

33