LCD Display Cabling Diagram

Cintiq, rear view

Analog Digital

A

Digital/Analog (DVI/VGA)

switch

Do not attach the USB or serial data cable until instructed to do so.

C

DC Input

DVI-I connector

To connect to a DVI-D connector, use the DVI-D to DVI-I adaptor.

To connect to a VGA connector, use the VGA to DVI-I adaptor.

Video card

DVI or VGA

B

Rear panel of your computer

Power Supply DTo AC Outlet

CAUTION Make sure that you correctly set the Cintiq Digital/Analog (DVI/VGA) switch for

the video card you are using.

Do not connect or disconnect the video or power cables while Cintiq or your computer are turned on – this can damage the LCD display or computer video card.

Do not exceed a display refresh rate of 75 Hz—this can overheat the LCD display and cause permanent damage.

20